Pubs, bars and drinks

Bar stock control and shrinkage: a practical guide

How pubs and restaurant bars run stocktakes, keep a wastage log, measure line loss and read variance reports to stop drink stock leaking away.

Ava research teamPublished 7 min read

On this page
  1. Where bar stock actually goes
  2. Excess stock is shrinkage you paid for in advance
  3. Build a stocktake routine that catches losses
  4. Keep a wastage log people actually fill in
  5. Measure line loss instead of guessing
  6. Read the variance pattern, not just the total
  7. Controls that do not slow the bar down
  8. Order to par levels, not to habit
  9. A weekly stock control checklist
  10. Frequently asked questions
  11. References

Key takeaways

  • Shrinkage is any gap between what the till says you sold and what left the cellar: over-pouring, line loss, comps, breakages, delivery errors and theft.
  • Stock audits found most pubs and many restaurants were over-stocked with liquor, so excess stock is a cost as well as a risk[1].
  • A weekly count of fast lines plus a full stocktake every four weeks, a signed wastage log and a variance report by product catch most leaks.
  • Read the pattern of variance: draught losses, spirit losses and bottle losses point to different causes and different fixes.

Where bar stock actually goes

Every bar has a gap between the stock it bought and the drinks it was paid for. The gap is shrinkage, and in most venues it is made of small, ordinary leaks rather than one dramatic theft. Some are unavoidable, such as the beer pulled through when lines are cleaned. Most can be measured and reduced once you know where to look.

  • Dispense loss: beer pulled through during line cleaning, fobbing, and the first pints after a keg change.
  • Over-pouring: free-poured spirits, wine glasses filled past the line, generous top-ups of draught.
  • Unrecorded comps and staff drinks: a round on the house that never hits the till.
  • Breakages and spoilage: dropped bottles, flat or out-of-date product, opened wine poured away.
  • Wrong till keys: a large glass rung as a small, or a premium spirit rung as the house pour.
  • Delivery shortfalls: cases signed for but not delivered, or credits for returns never received.
  • Theft: product walking out, or cash taken and the sale never rung.

Excess stock is shrinkage you paid for in advance

Stock control is usually framed as stopping losses, but the bigger cost in many cellars is simply holding too much. In Christie & Co stock audits, 67% of the pubs audited were over-stocked with liquor, with a cost value of over £10 million, and 57% of the restaurants audited over the last 18 months were too[1]. Cash sitting in slow-moving bottles cannot pay wages or suppliers, and the longer stock sits, the more likely it is to go out of date or be quietly used up.

Share of audited venues over-stocked with liquorChristie & Co stock audits, Pubs and Restaurants Market Review 2026
Share of audited venues over-stocked with liquorComparison. Pubs: 67%; Restaurants: 57%.67%PubsPubs: 67%57%RestaurantsRestaurants: 57%Share of audited venues over-stocked with liquorComparison. Pubs: 67%; Restaurants: 57%.67%PubsPubs: 67%57%RestaurantsRestaurants: 57%

Source: Christie & Co, 2026[1]

Show the data
ItemValue
Pubs67%
Restaurants57%

Costs are also moving. Alcohol Duty will rise in line with RPI, by 4.55%, on 1 February 2027[2], and 84% of hospitality leaders said they were concerned about food and drink inflation in Q3 2026[3]. Buying ahead of a duty change can make sense for fast sellers, but only if you can count it, store it properly and sell it before the cash is needed elsewhere.

Build a stocktake routine that catches losses

The aim is a routine that is light enough to keep doing. Small venues often stop counting because the full stocktake takes an afternoon. Split it into a short weekly check and a full count, and the habit survives busy months.

  1. Fix the period and the cut-off

    Pick a regular day and time when the bar is closed, for example Monday 10am. Every count starts and ends at the same point so sales, deliveries and transfers line up.

  2. Count in the same order every time

    Cellar first, then back bar, then fridges, then any second bar or function room. Use a printed sheet or app in shelf order so nothing is skipped or counted twice.

  3. Measure part-used products the same way

    Weigh or use tenths for open spirit bottles, and estimate kegs by weight or a keg gauge. Agree the method once and do not change it mid-year.

  4. Record every movement in between

    Deliveries against invoices, credits, transfers to the kitchen for cooking, staff drinks and comps all go on the sheet before the variance is calculated.

  5. Run the variance by product

    Opening stock plus purchases minus closing stock gives usage. Compare usage with what the till recorded as sold, product by product, in units and in money.

  6. Act on the top five

    Do not try to fix everything. Take the five products with the largest money variance and agree one action for each before the next count.

A practical rhythm is a weekly count of the twenty or so products that make up most of your drinks sales, and a full count every four weeks. An independent stocktaker for the full count adds a second pair of eyes and is often cheaper than the losses it uncovers, especially if the person counting is also the person ordering.

Keep a wastage log people actually fill in

A wastage log turns unexplained variance into explained variance. If line cleaning, breakages and comps are written down, the gap that remains is the one worth investigating. Keep the log on paper behind the bar or on the till, and make it quick: one line per event, a reason code and a signature.

A simple set of reason codes for a bar wastage log
Reason codeWhat it coversWho records itSign-off
LCLine cleaning and pull-throughCellar person on cleaning dayDuty manager
KCKeg or cask change, fobbingBar staff at the changeDuty manager
BRBreakages and spillsPerson who dropped itDuty manager
CPComplaint replaced or poured awayServer who took it backDuty manager
COComps and promotionsManager who authorised itGeneral manager weekly
SDStaff drinks allowanceStaff member, rung on a zero keyGeneral manager weekly
ODOut of date or spoiledPerson who found itGeneral manager weekly

Ring comps and staff drinks through the till on a zero-price key rather than writing them on a pad. The till then gives you a complete product count, and the variance report only has to explain genuine losses.

Measure line loss instead of guessing

Draught beer is where many pubs lose the most volume, because every line holds beer that is pulled through and discarded at each clean. The amount depends on the length and bore of the line, so measure it once and use the figure in your stocktake rather than an allowance someone guessed years ago.

Example: a line with an internal diameter of 9.5mm holds about 71ml per metre. A 12 metre run from cellar to font holds about 0.85 litres, roughly one and a half pints. Cleaning that line every week pulls through close to 78 pints a year before any fobbing or keg changes.

Once you know the expected loss per clean, compare it with what the wastage log records. If the log shows far more than the line volume, the cleaning is being done badly or the log is covering other losses. Long python runs, warm cellars and poorly balanced gas pressure all increase fobbing, so cellar temperature and gas checks belong on the same weekly sheet.

Read the variance pattern, not just the total

A single variance figure for the whole bar tells you there is a problem but not what it is. Break it down by product group and the pattern usually points to the cause.

What different stock variance patterns usually point to
PatternLikely causesFirst check
Draught short across all linesLine cleaning not logged, fobbing, warm cellarWastage log against line volumes; cellar temperature
One draught line shortFaulty font or coupler, wrong price key, popular with staffPour test on that line; till key mapping
Spirits shortFree pouring, double rung as single, unrecorded compsMeasures in use; void and no-sale reports
Bottled beer or wine shortBreakages not logged, theft, delivery shortfallsDelivery notes against invoices; CCTV on stock areas
Stock over (more than expected)Sales rung on the wrong key, counting errorsTill key mapping; recount

Treat surpluses with the same suspicion as shortages. A product that is consistently over is often having sales rung against it that belong to something else, which means another product is hiding a loss.

Controls that do not slow the bar down

  • Use measures or calibrated optics for every spirit, and lined glasses for wine, so pours are consistent without staff having to think.
  • Check deliveries against the delivery note at the door, before the driver leaves, and chase missing credits within a week.
  • Lock the cellar and limit keys to named people; log who opens it out of hours.
  • Review voids, refunds and no-sale openings on the till each week, by staff member.
  • Rotate stock first in, first out, and date opened wine, mixers and syrups.
  • Train new bar staff on the correct pour and on ringing every drink, including comps. Bar staff median pay was £12.81 an hour in April 2026[4], so a team that pours correctly from day one protects margin more cheaply than extra checks later.

Order to par levels, not to habit

Set a par level for each product: the stock you need to cover usage until the next delivery, plus a small buffer. Order the difference between what is on the shelf and the par, and review pars every quarter as the menu and season change.

Example: a pub sells about 18 bottles of its house gin a fortnight in winter and 30 in summer. With weekly deliveries, a winter par of 12 bottles covers a week and a bit. Keeping 40 on the shelf all year ties up cash and makes theft harder to spot.

Cut slow lines hard. If a bottle has not moved in three months, sell it through as a special, return it if the supplier allows, or stop reordering. Fewer lines are quicker to count, easier to check and cheaper to hold.

A weekly stock control checklist

  1. Count the fast-moving lines at the fixed cut-off time.
  2. Enter deliveries, credits, transfers and the wastage log.
  3. Run the variance by product and flag the top five in money terms.
  4. Check line cleaning, cellar temperature and gas pressure records.
  5. Review voids, refunds and no-sale openings by staff member.
  6. Compare stock on hand with par levels and adjust the next order.
  7. Agree one action per flagged product and check it at the next count.

For the margin side of the same problem, see drinks GP on beer, wine and spirits, and for keeping pours consistent across a team, bar staff training.

Frequently asked questions

How often should a pub do a full stocktake?

Most pubs run a full count every four weeks, lined up with their accounting period, plus a short weekly count of the fastest-moving products. Weekly checks catch problems while the cause is still fresh.

What stock variance is acceptable on draught beer?

There is no single legal or industry figure that fits every cellar. Measure your own line volumes and expected cleaning loss, then set a tolerance from your own history and investigate anything above it.

Should I use an independent stocktaker?

If the person who orders stock is also the person who counts it, an independent stocktaker adds a useful check. Many venues use one for the full four-weekly count and do the weekly checks in-house.

How should staff drinks and comps be recorded?

Ring them through the till on a zero-price key with a reason, so the till holds a full product count and the variance only has to explain real losses.

References

  1. Christie & Co (2026). Pubs & Restaurants Market Review 2026 (opens in a new tab) ↑

  2. HM Revenue & Customs (2027). Alcohol Duty uprating and Small Producer Relief changes (opens in a new tab) ↑

  3. NIQ (CGA by NIQ) and Zonal (2026). Hospitality's confidence rises after solid Q3, but Budget support crucial for stability (Business Confidence Survey with Zonal) (opens in a new tab) ↑

  4. Office for National Statistics (2026). ASHE 2026 provisional, Table 14.6a: hourly pay excluding overtime by occupation (SOC 2020), all employees (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo