Key takeaways
- Keep cask ale cellars at 11 to 13°C; warm beer is the most common reason cask fails a quality check.
- Clean lines on the interval your brewer or line-cleaning supplier specifies, every time, and record it.
- Rotate stock first in, first out, and order to sales: over-stocked cellars tie up cash and age the beer.
- Make the cellar someone’s job on every shift, with a written checklist and a temperature log.
The pint is made in the cellar
Guests judge a pub by the first sip, and most of what makes that sip good or bad happens downstairs. Temperature, clean lines, rested casks and fresh kegs matter more than the brand on the pump clip. A cellar that is too warm, lines that have been left too long or stock that sits for weeks will undo a good range and a good team.
Cellar work is also a cost control. Every pint poured to waste while chasing fob, every cask that goes off before it sells and every keg ordered and never needed is margin lost. Treat the cellar as a production area with routines, records and a named owner, not a store room.
Temperature: the first thing to get right
Cask Marque, which assesses cask ale quality in pubs, looks for cask ale served at 11 to 13 degrees Celsius with a one-degree tolerance either side, and says warm beer causes most of the failures its assessors find[1]. Keep the cellar itself in that range for cask, and make sure keg products pass through coolers that bring them to the serving temperature the brewer recommends.
- Fit a thermometer at cask height, not by the door, and read it at the start of every shift.
- Keep the cellar door closed and the cooling unit clear of boxes, empties and dust.
- Book an annual service for cellar cooling and the line coolers, ideally in spring before the warm months.
- Check python insulation where lines run through warm areas, and replace damaged lagging.
- Never use the cellar to store food, cleaning chemicals or anything that blocks airflow.
A line cleaning routine
Beer lines build up yeast, bacteria and beer stone over time, which affects taste, clarity and how the beer pours. Follow the interval your brewer, pub company or line-cleaning supplier specifies, and never stretch it because the bar is busy. If you use a line-cleaning system or service, keep its records with your own.
Prepare
Wear eye protection and gloves. Make up the line-cleaning solution to the manufacturer's strength in a clean bucket or the cleaning bottle, and label it so nobody mistakes it for water.
Flush the beer out
Disconnect the kegs or casks, connect the lines to the water ring or cleaning socket, and pull water through each tap until it runs clear.
Fill with cleaning solution
Draw solution through each line until it shows at the tap, then leave it to stand for the contact time the product specifies. Pull a little more through part way to move fresh solution along the line.
Clean taps and couplers
While the lines soak, dismantle and clean nozzles, sparklers and keg couplers in solution, then rinse.
Rinse thoroughly
Flush every line with clean water until no trace of the solution remains. Test with indicator paper if your product supplies it; any residue will taint the beer.
Reconnect and pull through
Reconnect stock, pull beer through until it pours clear and tastes right, and record the clean in the log with the date, time and initials.
Never leave cleaning solution in lines overnight, and never let anyone serve while a clean is in progress. Hang a sign on the pumps and tell the bar team before you start.
Keg handling and rotation
- Check deliveries against the order, look for damaged kegs and note best-before dates before signing.
- Store kegs upright, off the floor where possible, and away from heat sources.
- Rotate first in, first out: put new kegs behind older ones so the oldest is always connected next.
- Allow kegs time to cool in the cellar before connecting if they arrived warm.
- Use the right coupler and gas for each product, and turn off gas when changing kegs.
- Lift with care and use a keg lifter or a second person for heavy containers.
Cask handling in brief
Cask ale is a living product and needs more care. Stillage casks as soon as they arrive so the sediment settles, vent them to release excess condition, tap them, and let them condition until they are clear and lively before going on sale. Once a cask is on, sell it within the time your brewer recommends, which is why the number of cask lines should match your trade. A pub that sells cask slowly should run fewer cask lines and change them more often, not more lines that each sit for days.
Order to sales, not to fear
Running out of a popular beer on a Saturday is embarrassing, so many cellars carry too much. Stock audits by one agent found 67% of pubs were over-stocked with liquor, with a cost value of over £10 million across the pubs audited, and 57% of restaurants were over-stocked too[2][3]. Over-stocking costs twice: cash sitting in the cellar instead of the bank, and beer ageing past its best.
Source: Christie & Co, 2026[2]
Show the data
| Item | Value |
|---|---|
| Pubs | 67% |
| Restaurants | 57% |
Set par levels for each product from your actual weekly sales, with a small buffer for busy weekends and events, and order to bring stock back to par rather than by habit. Review pars every month and after any change to the range.
Container size and duty
Most draught beer and cider is sold from containers that qualify for draught relief, which lowers Alcohol Duty. To qualify, products must be below 8.5% ABV, and the container must hold 20 litres or more and be able to connect to a pump system or a gas pressurised drinks tap[4]. Smaller containers pay the full rate, so if a supplier offers mini kegs or bag-in-box formats, check the duty position before you assume the price compares like for like.
Cellar safety
- Carbon dioxide and mixed gas cylinders must be chained or secured upright, and any gas leak treated as an emergency.
- If your cellar has a gas detector or alarm, test it as the manufacturer requires and train staff to leave and ventilate if it sounds.
- Keep steps, hatches and drop areas clear, and use the hatch lock during deliveries.
- Store line-cleaning chemicals in their original containers, away from beer and gas, with safety data sheets to hand.
Train more than one person
Many pubs have one person who really understands the cellar, and quality falls apart on their days off. Train at least two people per site to the full routine, and give everyone who works the bar the basics: how to read the temperature log, what a good pint looks and tastes like, and when to stop serving a product and call the manager.
- Pair a new team member with the cellar lead for a full line clean before they do one alone.
- Keep a one-page cellar guide on the wall with temperatures, gas settings and who to call for faults.
- Taste each product at opening as a team habit, so off beer is caught before a guest finds it.
- Record who is trained and when, alongside your other training records.
A cellar checklist from daily to monthly
| When | Task | Record |
|---|---|---|
| Every opening | Read cellar and cooler temperatures; check gas pressure; taste a sample from each line | Temperature log, initials |
| Every opening | Check casks on sale and on conditioning; vent and tap as needed | Cask log |
| Every delivery | Check order, condition and dates; rotate stock | Signed delivery note |
| Line-cleaning interval | Full line clean, taps and couplers | Line-cleaning log |
| Weekly | Clean cellar floor, drip trays and stillage; check for leaks | Cleaning schedule |
| Monthly | Review par levels against sales; check cooling unit and lagging | Stock sheet |
| Annually | Service cellar cooling and line coolers; review procedures | Service report |
Example: chasing a fobbing lager
Example: on a hot Friday, a town-centre pub's best-selling lager starts fobbing and the bar team pour two pints to waste for every one served. The duty manager works through the cellar checklist. The cellar reads 15 degrees because a stack of empties is blocking the cooling unit. The line cooler is running but its water bath is low. The last line clean was nine days ago against a weekly schedule. She clears the unit, tops up the cooler, and the lager settles within the hour. On Monday she moves the empties store, adds the cooler water level to the opening checklist and books the line clean back onto its proper day. The waste had cost far more than the clean would have.
Frequently asked questions
What temperature should a pub cellar be?
For cask ale, 11 to 13°C. Cask Marque allows a one-degree tolerance either side and finds warm beer is the most common cause of failed quality checks.
How often should beer lines be cleaned?
On the interval your brewer, pub company or line-cleaning supplier specifies. Stick to it every time and record each clean.
Why is my beer fobbing?
Common causes are a warm cellar, a struggling line cooler, wrong gas pressure, dirty lines or a keg that has not settled. Work through temperature, gas and cleaning records first.
Do small kegs get draught relief?
Only if the container holds 20 litres or more, the product is below 8.5% ABV and the container can connect to a pump or gas pressurised tap.
References
Cask Marque (2026). What happens during a Cask Marque visit (opens in a new tab) ↑
Christie & Co (2026). Pubs & Restaurants Market Review 2026 (opens in a new tab) ↑
Christie & Co (2026). Pubs & Restaurants Market Review 2026 (opens in a new tab) ↑
HM Revenue & Customs (2026). Check if you can pay less Alcohol Duty on draught alcoholic products (opens in a new tab) ↑