Licensing and premises compliance

Gas safety in commercial kitchens

Gas safety duties for restaurant and pub kitchens: Gas Safe engineers, annual inspections, interlocks, staff checks, LPG and staff accommodation records.

Ava research teamPublished 7 min read

On this page
  1. The law in one paragraph
  2. Who can work on your gas equipment
  3. Inspection and maintenance
  4. What staff must know
  5. If someone smells gas
  6. Second-hand equipment, refits and conversions
  7. Ventilation, LPG and accommodation
  8. Gas, cost and the temptation to delay
  9. Frequently asked questions
  10. References

Key takeaways

  • Anyone installing, repairing or servicing catering gas equipment must be Gas Safe registered with certificates for that type of work; check the ID card and the register.
  • Employers must keep gas appliances, flues, pipework and safety devices safe; HSE treats an annual inspection as a reasonable minimum.
  • Staff who use gas need training in safe use and visual checks, including flame supervision devices, connections and the smell of gas.
  • Letting rooms and staff accommodation bring landlord duties: a gas safety check every 12 months and a copy of the record to occupants within 28 days.

The law in one paragraph

Gas work in restaurants, pubs, hotels and takeaways falls under the Gas Safety (Installation and Use) Regulations 1998. Product rules require new commercial catering appliances to meet safety standards and carry the required conformity marking. Over both sits the Health and Safety at Work etc Act 1974: employers must ensure, so far as reasonably practicable, the health and safety of employees and anyone else affected by their work, and employees must not interfere with anything provided for safety[1].

The practical consequence is simple. Gas appliances are safe only if they are installed, maintained and used correctly, and the business is responsible for all three.

Who can work on your gas equipment

Installation and repair of gas appliances, whether natural gas or LPG, must be done by a business or individual that is Gas Safe registered, and the engineer must hold valid certificates of competence for the particular types of gas equipment and work involved. Commercial catering is a specific competence; a domestic boiler engineer is not automatically qualified for your range or fryers[1].

  1. Ask for the Gas Safe ID card

    Check the photo, the registration number and the expiry date.

  2. Turn the card over

    The back lists the types of work the engineer is qualified for. Look for commercial catering.

  3. Verify on the register

    Check the registration on the Gas Safe Register website or by phone, because out-of-date certificates are sometimes used[1].

  4. Keep the paperwork

    File the engineer's report or certificate for every visit with the date, the appliances checked and any defects found.

Inspection and maintenance

Regulation 35 of the 1998 Regulations requires employers and the self-employed to ensure that gas appliances, flues, pipework and safety devices are maintained in a safe condition. Inspection and maintenance count as gas work, so they must be done by a competent, registered engineer working to current industry standards[1].

How often depends on the equipment and how hard it is used, and should follow the manufacturer's recommendations. As a general rule, HSE says annual inspections are a reasonable minimum, with repairs as needed[1]. Busy kitchens running ranges, fryers and chargrills for long hours may need more.

Example gas safety schedule for a restaurant or pub kitchen. Adapt it to your equipment and the manufacturer's instructions.
CheckWhoWhen
Safety inspection of all gas appliances, pipework and safety devicesGas Safe registered engineer with catering competenceAt least annually, or as the manufacturer specifies
Ventilation and gas interlock functionGas Safe registered engineerAt each inspection and after any ventilation change
Visual check of hoses, connections, restraints and castor locksTrained kitchen staffDaily, at start of service
Flame supervision devices workingTrained kitchen staff, with engineer for repairsDaily, by watching the burner behaviour
Landlord gas safety check on letting rooms or staff accommodationGas Safe registered engineerEvery 12 months, with a copy to occupants within 28 days

What staff must know

Everyone who uses gas equipment should be trained to use it and to carry out visual checks for obvious faults. HSE lists damaged pipework and connections, inoperative flame supervision devices, missing restraints on equipment, inoperative locks on the castors of mobile equipment and smells of escaping gas, and expects all staff to know what to do in each case[1].

  • Flame supervision devices shut off the gas automatically if the flame goes out. If a burner keeps going out, or stays on without a flame, take it out of use and call the engineer.
  • Restraints stop mobile appliances being pulled away from the wall and stressing the flexible hose. Reconnect them after cleaning.
  • Routine tasks such as connecting and disconnecting plug-in connections to move equipment for cleaning, or changing LPG cylinders and hoses, can be done by competent staff who are not Gas Safe registered. New installation and commissioning of an appliance with a plug-in connection must be done by a registered engineer[1].
  • Nobody should relight pilots or adjust burners by improvising, and nobody should wedge, tape or bypass a safety device.

Example: a fictional pub kitchen adds a two-minute gas check to its opening list. The first chef in confirms the extraction is running before lighting anything, checks that each fryer and range restraint is fixed, looks at the hoses for kinks or damage, and notes any burner that will not stay lit. Faults go on a defects sheet that the manager reviews daily.

If someone smells gas

  1. Stop and isolate

    Turn off the gas at the kitchen emergency control valve if it is safe to reach. Everyone should know where it is; mark it clearly.

  2. No ignition

    Do not operate electrical switches, light anything or use equipment that could spark. Put out naked flames.

  3. Ventilate and clear the area

    Open doors and windows and move staff and customers away from the area, following your emergency plan.

  4. Call for help

    Phone the gas emergency number for your area from outside the affected area. Display the number next to the emergency control valve and the meter.

  5. Do not restore the supply yourself

    Wait until the emergency service or a Gas Safe registered engineer confirms it is safe.

Some gas incidents must also be reported to HSE. Its online reporting service has separate forms for flammable gas incidents and dangerous gas fittings, alongside the forms for injuries and dangerous occurrences[2]. Our guide to RIDDOR reporting in hospitality explains who reports and when.

Second-hand equipment, refits and conversions

Kitchen refits and second-hand equipment are where gas safety slips most often, because the work is rushed to hit an opening date. Build these rules into every project:

  • Every new or second-hand gas appliance must be installed and commissioned by a Gas Safe registered engineer with catering competence, including the safety checks the regulations require, before it is used[1].
  • Check the appliance's data plate for the gas type. A range built for natural gas cannot simply be connected to LPG, or the other way round; conversion is gas work for a registered engineer.
  • Do not let an electrician, shopfitter or general builder move, cap or reconnect gas pipework, even temporarily.
  • Ask for written commissioning records for each appliance and add them to the gas file.
  • After the refit, have the ventilation and interlock tested with all the new appliances running, not just the ones that were there before.

If you buy a business with its kitchen in place, ask for the most recent gas inspection report and any defect notices, and book your own inspection before the first service under your name. You are taking on the duty from day one, whatever the previous operator did.

Ventilation, LPG and accommodation

Gas appliances depend on ventilation. Where extraction acts as a flue, it must be interlocked with the gas supply, and manual bypasses are not permitted[1]. Our guide to kitchen extraction and ventilation compliance covers design, cleaning and interlocks in detail.

LPG brings its own risks. Store cylinders as the supplier instructs, outside and away from drains and escape routes, and train staff who change cylinders. Mobile catering vehicles have extra rules: the vehicle must be adequately ventilated and pilot lights should not be lit while it is moving[1].

Accommodation brings landlord duties. Where you provide residential accommodation, including hotel and guest rooms, tied accommodation and staff accommodation, relevant gas appliances and flues must be checked for safety every 12 months by a Gas Safe registered engineer, and occupants must be given a copy of the landlord's gas safety record within 28 days[1].

Gas, cost and the temptation to delay

Gas is a major running cost in most commercial kitchens as well as one of their biggest hazards. In late October 2026, 56.2% of UK accommodation and food businesses were very concerned about energy prices and a further 34.2% somewhat concerned[3]. Energy prices were also the main reason those businesses gave for considering raising their own prices in November 2026, cited by 52.8%[4].

How concerned UK accommodation and food businesses were about energy prices, late October 2026ONS Business Insights and Conditions Survey, 19 October to 1 November 2026
How concerned UK accommodation and food businesses were about energy prices, late October 2026Stacked bar chart. Very concerned: 56.2%; Somewhat concerned: 34.2%; Other responses: 9.6%.Very concerned: 56.2% (56%)Somewhat concerned: 34.2% (34%)Other responses: 9.6% (10%)How concerned UK accommodation and food businesses were about energy prices, late October 2026Stacked bar chart. Very concerned: 56.2%; Somewhat concerned: 34.2%; Other responses: 9.6%.Very concerned: 56.2% (56%)Somewhat concerned: 34.2% (34%)Other responses: 9.6% (10%)
  • Very concerned 56.2%
  • Somewhat concerned 34.2%
  • Other responses 9.6%

Source: Office for National Statistics, 2026[3]

Show the data
ItemValue
Very concerned56.2%
Somewhat concerned34.2%
Other responses9.6%

Cost pressure is a reason to manage gas better, not to skip the annual inspection. Turn off burners and ranges between rushes rather than leaving them idling, fix leaking seals and faulty thermostats quickly, and ask your engineer at the annual visit whether any appliance is burning inefficiently. A well-maintained appliance is both safer and cheaper to run. For the rest of your safety framework, see health and safety basics for restaurants and fire risk assessment for restaurants.

Frequently asked questions

How often does a commercial kitchen need a gas safety check?

HSE guidance treats an annual inspection by a Gas Safe registered engineer as a reasonable minimum, with the manufacturer's recommendations and heavy use possibly requiring more frequent checks.

Is there a gas safety certificate for restaurants?

There is no single certificate in law for commercial kitchens, but the engineer's inspection report is your evidence that appliances, pipework and safety devices are maintained in a safe condition. Letting rooms and staff accommodation need a landlord's gas safety record every 12 months.

Can kitchen staff change an LPG cylinder?

Yes, if they are competent and trained. Routine tasks such as changing cylinders or using plug-in connections do not require Gas Safe registration, but new installations do.

What should I check on a gas engineer's ID card?

That the card is current, the photo matches, and the back lists commercial catering among the types of work they are qualified to do. You can verify the registration with Gas Safe Register.

References

  1. Health and Safety Executive (2017). Gas safety in catering and hospitality (Catering Information Sheet No 23, revision 3) (opens in a new tab) ↑

  2. Health and Safety Executive (2025). How to make a RIDDOR report (opens in a new tab) ↑

  3. Office for National Statistics (2026). Business insights and impact on the UK economy, wave 167 dataset (opens in a new tab) ↑

  4. Office for National Statistics (2026). Business insights and impact on the UK economy, wave 166 dataset (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo