Key takeaways
- Prime cost is the cost of food and drink sold plus total labour cost; as a share of net sales it is the biggest controllable number in the P&L.
- Watching food and labour together exposes false savings, where cutting one simply moves cost into the other.
- Set a prime cost ceiling from your occupancy costs and profit goal; a high-rent site needs a lower ceiling.
- Track it weekly with a stock count of key lines and payroll-based labour, and act on two-week trends, not single weeks.
What prime cost is
Prime cost adds the two costs that move with how you run the business day to day: what you spend on the food and drink you sell, and what you spend on the people who prepare and serve it. Divide by net sales, excluding VAT, for the prime cost percentage. Everything else in the P&L, such as rent, rates, insurance and most utilities, is harder to change in the short term.
Prime cost % = (cost of food and drink sold + total labour cost) ÷ net sales. Cost of goods sold = opening stock + purchases − closing stock. Labour includes employer National Insurance, pension, holiday and sick pay.
Both halves are under pressure. In October 2026, labour costs (39%) and material costs (38.5%) were among the top challenges to turnover reported by UK accommodation and food businesses, just behind economic uncertainty (39.8%)[1].
Why food and labour belong in one number
Food cost and labour cost trade off against each other. Almost every decision about how a kitchen works moves cost from one to the other, and looking at either alone can make a bad decision look good.
- Buying in desserts instead of employing a pastry cook raises food cost and lowers labour.
- Buying whole fish and butchering in-house lowers ingredient cost per portion but needs skilled hours.
- Pre-portioned or prepared vegetables cost more per kilo but save prep shifts.
- A longer menu raises waste (food cost) and needs more chefs (labour).
- Self-order kiosks or QR ordering may lower front-of-house labour while add-on prompts change what guests buy.
Prime cost is the referee. If a change lowers food cost by two points and raises labour by three, prime cost rises and the change has made the business worse, even though the chef can show a better GP.
Example: two venues, same prime cost
| Measure | Venue A: scratch kitchen | Venue B: assembly kitchen |
|---|---|---|
| Food and drink cost % of sales | 27% | 34% |
| Labour cost % of sales | 36% | 29% |
| Prime cost % | 63% | 63% |
| Typical risk | Losing a skilled chef | Supplier price rises |
| Best lever | Prep scheduling and yield | Supplier terms and menu design |
Example. Neither venue is right or wrong. They have chosen different models, and each needs to manage the risk that comes with it. What both should do is set a prime cost ceiling and judge every operational change against it.
Setting a ceiling
There is no national benchmark for prime cost, and figures quoted from other countries rarely fit UK rents, rates and wage rules. Work out your own ceiling from the rest of the P&L.
Add up occupancy and overheads
Rent, business rates, energy, insurance, repairs, card fees, software, marketing and professional fees, as a share of net sales.
Decide the profit you need
Operating profit before tax, as a share of sales, enough to repay debt and reinvest.
Subtract both from 100
The result is your prime cost ceiling. A venue with overheads of 27% that needs 10% profit has a ceiling of 63%.
Split it into food and labour targets
Choose the split that fits your kitchen model, as in the table above, and review it if the model changes.
Recheck every six months
Energy, rates and rent reviews move overheads; when they rise, the prime cost ceiling must fall or prices must rise.
Calculating it weekly
- Count high-value stock every week on the same day and time: meat, fish, dairy, spirits, wine, draught. Estimate low-value lines, or count them monthly.
- Add the week's purchases from invoices and credit notes.
- Cost of goods sold = opening stock + purchases − closing stock.
- Take labour from payroll for the same week, with employer costs added. If payroll is fortnightly or monthly, use rota hours multiplied by a loaded hourly rate and reconcile monthly.
- Divide the total by net sales excluding VAT and service charge.
- Plot it on a simple chart with the ceiling marked, alongside food and labour separately.
Weekly figures are noisy, especially around deliveries and stock counts. React to a two-week trend above the ceiling, not to one bad week.
What moves prime cost, and what to do
- Supplier prices up: 84% of hospitality leaders were concerned about food and drink inflation in Q3 2026[2]. Re-cost the menu, look for substitutions that do not hurt the dish, and renegotiate or consolidate suppliers.
- Wage floor up: the National Living Wage for those aged 21 and over is £12.71 an hour from April 2026[3], and employer National Insurance is 15% above the secondary threshold[4]. Plan rota changes and price moves together, not separately.
- Sales down with fixed labour unchanged: labour percentage jumps even though no one was added. Trim variable hours to the new demand, and look at opening hours on the weakest day parts.
- Waste up: check prep quantities against forecasts and the waste log. Waste lands in food cost and wastes the labour that prepared it.
- Menu mix shift: guests moving to lower-margin dishes raise food cost even if every dish is costed correctly.
Example: reading four weeks of prime cost
Example. A fictional city pub with a dining room sets a prime cost ceiling of 62%. Over four weeks in October its figures are 60.8%, 61.4%, 63.9% and 64.2%. Food and drink cost is steady at about 30%; labour has climbed from 30.8% to 34.1%.
Example, continued. The manager looks at sales and hours together. Sales fell by about 9% across the month as a local office moved out, while rota hours were unchanged, so labour as a share of sales rose with no new staff. The response is not to cut the chef's ordering, which would do nothing, but to remove two weekday lunch shifts, close the kitchen an hour earlier on Mondays and Tuesdays, and run a lunchtime offer aimed at the nearby college. Four weeks later, prime cost is back to 62.3%.
Example. Looking at food cost alone, the pub would have seen nothing wrong. Looking at labour alone, it might have cut evening staff, where the trade still was. The combined number, read alongside sales, pointed to the right fix.
Prices are the third lever
Prime cost is a percentage of sales, so prices move it too. When UK accommodation and food businesses were considering price rises for November 2026, energy prices (52.8%) and labour costs (41.8%) were the main reasons[5]. Raising prices lowers prime cost percentage only if guests keep coming and spending; check covers and spend per head after every price change. Menu prices in the restaurants and hotels division of the Consumer Prices Index rose 3.8% in the year to September 2026[6], so guests have already seen rises elsewhere.
The most durable improvements come from changing how the work is done rather than squeezing harder: fewer, better dishes; prep timed to demand; rotas built from bookings; and staff time taken off tasks that do not need a person, such as repeat phone questions during service.
Pitfalls
- Using purchases instead of cost of goods sold. A big delivery before a bank holiday makes one week look terrible and the next look brilliant.
- Leaving out salaried staff. Managers and head chefs are labour, even if they are paid the same every month.
- Including VAT or service charge in sales, which understates prime cost.
- Forgetting staff food, comps and wastage, which are real food cost even with no sale.
- Comparing with another venue's figure without knowing its rent, format or how it calculates.
For each half in more detail, read labour cost percentage: targets and how to hit them and how to calculate dish GP and set prices. To see how seats and spend feed the sales line, see average spend per head and RevPASH.
Frequently asked questions
What is prime cost in a restaurant?
The cost of food and drink sold plus total labour cost, including employer National Insurance, pension, holiday and sick pay. As a percentage of net sales it shows how much of each pound of sales goes on the two main controllable costs.
What is a good prime cost percentage for a UK restaurant?
It depends on your rent, overheads and the profit you need. Subtract overheads and target profit from 100 to find your ceiling, then keep prime cost below it.
Why look at prime cost instead of food cost and labour separately?
Because they trade off. Buying prepared ingredients raises food cost but saves labour, and the reverse. Prime cost shows whether a change helped overall.
How often should prime cost be calculated?
Weekly, using a stock count of high-value lines and payroll-based labour, with a full reconciliation each month.
References
Office for National Statistics (2026). Business insights and impact on the UK economy, wave 166 dataset (opens in a new tab) ↑
NIQ (CGA by NIQ) and Zonal (2026). Hospitality's confidence rises after solid Q3, but Budget support crucial for stability (Business Confidence Survey with Zonal) (opens in a new tab) ↑
GOV.UK (2026). National Minimum Wage and National Living Wage rates (opens in a new tab) ↑
ICAEW Library & Information Service (2025). Hospitality: industry profile (opens in a new tab) ↑
Office for National Statistics (2026). Business insights and impact on the UK economy, wave 166 dataset (opens in a new tab) ↑
Office for National Statistics (2026). Consumer price inflation, UK: September 2026 (opens in a new tab) ↑