Metrics and profitability

Theoretical vs actual GP: finding the gap

Calculate theoretical and actual gross profit for your restaurant or pub, then trace the gap to waste, portions, pricing, stock errors or theft.

Ava research teamPublished 6 min read

On this page
  1. Two numbers that should match
  2. Calculating theoretical GP
  3. Calculating actual GP
  4. Where the gap comes from
  5. Stop the gap at the delivery door
  6. Waste: measure it before you blame it
  7. Drinks: the wet stock gap
  8. Inflation: keep recipe costs live
  9. Example: tracing a three-point gap
  10. A monthly gap routine
  11. Frequently asked questions
  12. References

Key takeaways

  • Theoretical GP is what your recipes and sales mix say you should make; actual GP is what your stock counts say you did make. The gap is money.
  • Work through the causes in order: count errors, invoice and price errors, recipe drift, portions, waste, unrecorded staff food and comps, then theft.
  • Waste is large across the sector: hospitality and food service generates about 1.1 million tonnes of food waste a year, 11% of the UK total[1].
  • Check wet stock too: stock audits found 57% of restaurants and 67% of pubs over-stocked with liquor[2].

Two numbers that should match

Every dish and drink you sell has a recipe cost. Multiply each item's cost by the number sold, add them up and compare with net sales, and you get theoretical food or drink cost: what you would spend if every plate went out exactly to specification and nothing was wasted, eaten, given away or stolen. Theoretical GP is the other side of that figure.

Actual cost comes from the stock count: opening stock plus purchases minus closing stock. The difference between the two is your gap. A small gap is normal, because no kitchen or bar is perfect. A growing or large gap is the clearest sign that money is leaking somewhere between the delivery door and the guest's table.

Calculating theoretical GP

  1. Cost every recipe

    List every ingredient and its quantity per portion, including garnish, sauces and oil. Price each from the latest invoice, adjusted for yield: a whole salmon or a case of lemons gives less usable product than its purchase weight.

  2. Keep specifications current

    Update recipe costs when supplier prices change. A spreadsheet that still uses last year's prices will show a gap that is really inflation.

  3. Pull the sales mix

    Export the number of each item sold for the period from your EPOS, including items sold within set menus and packages.

  4. Multiply and total

    Theoretical cost = sum of (recipe cost x quantity sold). Divide by net sales of food (or drink) for the theoretical cost percentage; theoretical GP is the rest of each pound of sales.

  5. Do drinks separately

    Use the measure for each drink (a 25ml or 50ml spirit, 175ml or 250ml wine, a pint) and the cost per measure from the bottle, keg or case price.

Calculating actual GP

Count stock at the same time on the same day each period, using a count sheet in shelf order so nothing is missed. Value it at latest cost. Actual cost = opening stock + purchases - credits - closing stock. Divide by net sales for the actual cost percentage. Make sure the sales and the purchases cover exactly the same days as the counts; a delivery received after the count but invoiced in the period is a common source of a false gap.

Set a tolerance before you start, for example a one-point gap between theoretical and actual cost. Inside it, note the result and move on. Outside it for two periods running, investigate.

Where the gap comes from

Common causes of a gap between theoretical and actual GP, with a test and a fix for each.
CauseSignsHow to test itFix
Stock count errorGap swings up then down between periodsRecount the top 20 lines by valueFixed count sheet, two counters, same time
Invoice or price errorGap appears after a supplier changeCheck invoices against orders and price listCheck deliveries at the door; reconcile weekly
Recipe driftGap on a few dishes, not across the menuWeigh ten portions of the top dishesPhotos and specs at each station; portion tools
Over-portioningGenerous plates, compliments on sizeWeigh portions at peak and quiet timesScoops, ladles, portioned prep
WasteFull bins, prep thrown at closeWaste sheet for two weeksAdjust prep pars; first in, first out
Staff food and comps not recordedGap grows with staffing levelsCompare comp and staff meal records with the gapRing everything through the till
Wrong items rung on the tillExpensive dish costs high, cheap dish lowCompare quantities sold with portions preparedFix button layout; train staff
TheftGap concentrated in high-value itemsSpot counts of meat, fish, spiritsLocked storage, controlled keys, regular spot checks

Work through them in that order. Most gaps turn out to be counting, invoice or recipe problems, which are quick to fix, and checking those first avoids accusing anyone of theft when the real cause is a missed shelf in the walk-in.

Stop the gap at the delivery door

Some of the gap never reaches the kitchen. Short deliveries, wrong weights and substituted products are paid for at full price unless someone checks them when they arrive.

  • Check every delivery against the order, not just the delivery note, before the driver leaves.
  • Weigh meat and fish; check counts on cases and trays.
  • Note substitutions and refuse any product that does not match your specification or temperature checks.
  • Write shortages and rejections on the delivery note and ask the driver to sign it, then chase the credit note the same week.
  • Compare invoice prices with your agreed price list, and query any increase you were not told about.
  • Give one person on each shift responsibility for receiving, with a deputy who knows the routine.

Waste: measure it before you blame it

Hospitality and food service generates about 1.1 million tonnes of food waste a year, around 11% of all UK food waste[1]. The edible part, about 800,000 tonnes, was valued at £3.21 billion at 2021 prices[1]. In a single kitchen, waste is often the biggest part of the gap, but it is rarely measured, so it gets blamed or ignored without evidence.

  • Put a waste sheet at the pass and in the prep area: item, quantity or weight, reason (spoilage, over-prep, returned plate, dropped), and who recorded it.
  • Cost the sheet weekly at recipe cost and compare it with the gap.
  • Look at plate waste on returned plates: if guests regularly leave the same side, the portion is too big or the dish is wrong.
  • Match prep to forecast covers rather than to habit, and move items close to their use-by date into specials or staff meals.

Drinks: the wet stock gap

Bars lose margin through over-pouring, free drinks, line cleaning waste, breakages and short deliveries. Too much stock makes it harder to spot. In stock audits, 57% of restaurants were over-stocked with liquor, tying up more than £7 million across the restaurants audited, and 67% of pubs audited were over-stocked, with a cost value of over £10 million[2].

Venues found over-stocked with liquor in stock auditsShare of audited venues found over-stocked with liquor (Christie and Co stock audits).
Venues found over-stocked with liquor in stock auditsComparison. Restaurants: 57%; Pubs: 67%.57%RestaurantsRestaurants: 57%67%PubsPubs: 67%Venues found over-stocked with liquor in stock auditsComparison. Restaurants: 57%; Pubs: 67%.57%RestaurantsRestaurants: 57%67%PubsPubs: 67%

Source: Christie & Co, 2026[2]

Show the data
ItemValue
Restaurants57%
Pubs67%

Keep par levels for each line and order to them. Count spirits by weight or to the tenth of a bottle, record line cleaning waste and ullage, and check that every free drink is rung through as a comp. Costs are rising too: Alcohol Duty will rise in line with RPI, by 4.55%, on 1 February 2027[3]. Update drink recipe costs when it does, or the gap will widen on paper even if nothing changes behind the bar.

Inflation: keep recipe costs live

84% of hospitality leaders were concerned about food and drink inflation in Q3 2026[4]. When prices move quickly, a theoretical cost based on old prices understates what you should be spending, and the gap looks bigger than it is. Update the cost of your top 30 ingredients every month, and the rest each quarter. Then compare the new theoretical GP with your target: if theoretical GP has fallen, the problem is pricing, not the kitchen.

When you change a recipe to protect margin, such as switching an ingredient or supplier, update the allergen information at the same time. Businesses serving non-prepacked food must supply allergen information for every item that contains any of the 14 allergens[5], and a substitution can change that.

Example: tracing a three-point gap

Example (fictional). A 100-cover brasserie has a theoretical food cost of 27% and an actual of 30% for two months running: on £40,000 of monthly food sales, the three-point gap is about £1,200 a month. The head chef recounts the walk-in and finds a missed shelf of frozen goods, which closes half a point. Invoices show the beef supplier raised prices two months ago, but the recipe sheet was not updated; that is another point, and a pricing problem rather than a kitchen one. A two-week waste sheet shows bread and chips thrown away at the end of each service, worth about half a point. Weighing portions of the steak frites shows chips at nearly double the specification. Prep pars are cut, a chip scoop is introduced and the menu price of the beef dishes is reviewed. Next month the gap is under one point.

A monthly gap routine

  1. Count stock on the last day of the period, same time, same sheet.
  2. Pull the sales mix and calculate theoretical cost with current recipe prices.
  3. Calculate actual cost and the gap, for food and drink separately.
  4. If the gap is outside tolerance, recount the top 20 lines and check the period's invoices.
  5. Review the waste sheet, comps and staff food records.
  6. Weigh portions of the top five dishes and check drink measures.
  7. Write down the cause you found and the fix, and check next month whether it worked.

Frequently asked questions

What is an acceptable gap between theoretical and actual GP?

Set your own tolerance based on your menu and how tightly you control it. Many kitchens aim for around a point. What matters most is that the gap is stable and that you investigate when it widens.

How often should I count stock?

Weekly for the highest-value lines such as meat, fish and spirits, and a full count at least monthly. Counting at the same time each period is more important than counting often.

Can my EPOS calculate theoretical GP for me?

Many EPOS and stock systems can, if you load recipes and keep ingredient prices up to date. The software is only as good as the recipe data, so check a few dishes by hand when you set it up and whenever prices change.

References

  1. WRAP (2025). UK Food Waste & Food Surplus: Key Facts (updated July 2025) (opens in a new tab) ↑

  2. Christie & Co (2026). Pubs & Restaurants Market Review 2026 (opens in a new tab) ↑

  3. HM Revenue & Customs (2027). Alcohol Duty uprating and Small Producer Relief changes (opens in a new tab) ↑

  4. NIQ (CGA by NIQ) and Zonal (2026). Hospitality's confidence rises after solid Q3, but Budget support crucial for stability (Business Confidence Survey with Zonal) (opens in a new tab) ↑

  5. Food Standards Agency (2026). Allergen guidance for food businesses (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo