Key takeaways
- In England, chilled food must not be held above 8°C and hot food must not be held below 63°C, with short, one-off tolerances for service and display.
- Cooking is about time as well as temperature: 70°C for 2 minutes is as effective as 75°C for 30 seconds or 80°C for 6 seconds at the core.
- A probe that reads wrongly makes every record wrong. Clean it between uses and check its accuracy regularly.
- Logs should record actual readings, the time, who took them and what was done when a reading failed.
Why temperature is the first thing officers check
Temperature control is the most measurable part of food safety. An officer can probe your fridge in seconds and compare the reading with your log. Inspections score how hygienically food is handled and how the business manages food safety[1], and temperature records sit at the heart of both. If the fridge reads 11°C and the log says 3°C every day this week, the officer learns something about the fridge and something more serious about the records.
The stakes are commercial as well as legal. Among people who know the hygiene rating scheme, 52% say a 4 is the lowest rating they would generally accept[2]. Weak temperature control is one of the quickest ways to lose a 5.
The numbers that matter
| Control point | Figure | Status |
|---|---|---|
| Chilled food held in England | Not above 8°C | Legal limit |
| Chilled food on display or for service | Above 8°C for less than 4 hours, once | Legal tolerance |
| Hot food held in England | Not below 63°C | Legal limit |
| Hot food on display or for service | Below 63°C for less than 2 hours, once | Legal tolerance |
| Fridge setting | Between 0 and 5°C | FSA guidance |
| Freezer | Around −18°C | FSA guidance |
| Cooking (core) | 70°C for 2 minutes or an equivalent combination | FSA guidance |
In England, it is an offence to keep food that needs chilling above 8°C, and food that needs to be kept hot below 63°C[3]. There are narrow defences. Chilled food can be above 8°C for service or display for a single period of less than four hours, and hot food can fall below 63°C for service or display for a single period of less than two hours[3]. After that, chilled food must go back below 8°C or be thrown away, and hot food must be used, chilled quickly or discarded, following your written procedure.
The Food Standards Agency advises setting fridges between 0 and 5°C and freezers at around −18°C[4]. Working to 5°C rather than 8°C gives you a margin when doors are opened during service.
Cooking: time matters as much as temperature
The Food Standards Agency gives a set of core temperature and time combinations that are equally effective: 60°C for 45 minutes, 65°C for 10 minutes, 70°C for 2 minutes, 75°C for 30 seconds and 80°C for 6 seconds[5]. The higher the temperature, the shorter the time needed in the middle of the food.
This matters for modern cooking. A pork belly cooked low and slow, or a chicken breast cooked in a water bath, can be safe at a lower temperature if it is held there long enough. But the time has to be measured at the core, and the method must be written into your food safety system with records. If in doubt, probe for 75°C and hold for 30 seconds.
Choosing and looking after a probe
- Use a digital probe with a thin stem that reads to one decimal place, and keep at least one spare.
- Give each section its own probe and a place to keep it, so nobody has to go looking during service.
- Clean and disinfect the probe before and after every use, especially when moving from raw to cooked food. Use single-use probe wipes or a sanitiser that meets recognised standards.
- Check accuracy regularly. A common method is to place the probe in iced water, which should read close to 0°C, and in boiling water, which should read close to 100°C at sea level. House policy Example: if the probe reads more than 1°C out, replace it or recalibrate it.
- Record each accuracy check with the date, the readings and the initials of the person who did it.
- Replace batteries on a schedule rather than waiting for the screen to fade.
What to probe, and when
Deliveries
Probe between two packs of chilled or frozen goods rather than piercing them. Reject deliveries above your limit and note it on the goods-in sheet.
Cold storage
Read every fridge and freezer at least at opening and closing. Read the display and, once a day, a probe in a sample product or a glass of water left in the fridge.
Cooking
Probe the thickest part of the food, away from bone, for each batch or a set number of portions of high-risk food such as poultry, minced meat and rolled joints.
Cooling
Record the time food comes out of the oven and the time it goes into the fridge, and probe it before it goes in.
Hot holding
Probe each item when it goes into the bain-marie or hot cupboard and at set intervals, such as every hour.
Reheating
Probe to steaming hot throughout. Scotland sets its own minimum reheating temperature in law; see Scotland's Food Hygiene Information Scheme explained.
Probe readings are only evidence if they are written down at the time. A reading remembered at the end of service is not a record.
Agree temperatures with your suppliers
Temperature control starts before food reaches your door. Write the delivery temperatures you will accept into your supplier agreements, and make sure drivers know you will check. Ask for deliveries at times when someone trained is on site to probe and put chilled and frozen goods away straight away; a crate of chicken left by the back door during a lunch rush undoes the supplier's cold chain in minutes. Record every rejected delivery and the reason, and raise repeated problems with the supplier in writing. If a supplier cannot meet your limits consistently, that is a food safety decision as much as a purchasing one.
Logs that stand up at inspection
Officers look for logs that look like they were filled in during real service. That means real numbers that vary a little, handwriting from different staff, the occasional failed reading with a note of what happened, and no gaps on trading days. A log full of identical readings in the same pen raises questions.
- Record the reading, not a tick: 3.4°C, not ‘OK’.
- Record the time and the initials of the person who took it.
- Add a column for corrective action and fill it in whenever a reading fails.
- Keep logs where the checks happen: fridge logs on or near the fridges, cooking logs at the pass.
- Have the shift lead review and initial the day's logs at close.
- File completed logs and keep them with your food safety records.
When a reading fails
The value of a log is in what happens when a reading is out of range. Decide in advance what staff should do for each type of failure, write it into your procedures and train it.
- Fridge above 8°C: check the door seal and settings, move food to another fridge, check how long it was warm. Food that may have been above the limit for longer than your procedure allows is thrown away. Call an engineer if it does not recover.
- Cooking below the target: keep cooking and probe again. Never serve on the basis that it ‘looked done’.
- Hot holding below 63°C: if the food has been below 63°C on display for less than two hours, and only once, follow your written procedure, for example reheating it and returning it to hot holding or cooling it quickly; otherwise throw it away.
- Freezer above its usual reading: check for a door left open or an overloaded freezer, and decide whether thawed food can be used straight away or must be discarded.
Example: at a fictional curry house in Bradford, the closing chef finds the walk-in at 9°C. They move the meat and dairy into the reach-in fridges, note the time and reading, and call the engineer, who replaces a failed fan the next morning. The log shows the reading, the actions, the engineer's visit and the recovered reading at 11am.
Automatic monitoring
Wireless sensors in fridges and freezers can log temperatures every few minutes and send an alert when a unit warms up overnight. They are useful for catching failures when nobody is on site, and they produce tidy records. They do not replace probing food during cooking, cooling and hot holding, and somebody still needs to respond to the alerts and record what they did. If you install them, check the sensors against a calibrated probe from time to time.
For how temperatures feed into the wider system, see HACCP for restaurants in plain English. For the daily routine around these checks, see kitchen opening and closing checks.
Frequently asked questions
What temperature should a commercial fridge be?
In England the legal limit for chilled food is 8°C. The Food Standards Agency advises setting fridges between 0 and 5°C to give a safety margin.
What is the legal hot holding temperature?
Hot food must be kept at or above 63°C. It can be below 63°C for service or display for a single period of less than two hours.
How often should I calibrate my probe thermometer?
No legal interval is set. Many kitchens check accuracy weekly or monthly using iced and boiling water, and record each check.
What core temperature should food reach?
The FSA guidance is 70°C for 2 minutes at the core, or an equivalent combination such as 75°C for 30 seconds or 80°C for 6 seconds.
References
Food Standards Agency (2026). Food Hygiene Rating Scheme (opens in a new tab) ↑
Food Standards Agency (2025). Food Hygiene Rating Scheme (FHRS): Food and You 2 report, wave 11 (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2013). The Food Safety and Hygiene (England) Regulations 2013, Schedule 4: temperature control requirements (opens in a new tab) ↑
Food Standards Agency (2026). How to chill, freeze and defrost food safely (opens in a new tab) ↑
Food Standards Agency (2026). Cooking your food (opens in a new tab) ↑