Food safety, hygiene and allergens

Kitchen opening and closing checks

Ten-minute opening and closing checklists for restaurant and pub kitchens, what good looks like, what to do when a check fails, and how to make them stick.

Ava research teamPublished 7 min read

On this page
  1. Why the first and last ten minutes matter
  2. The opening checklist
  3. The closing checklist
  4. What good looks like
  5. Who signs, and handovers
  6. Making checks stick
  7. Adapting the lists to your kitchen
  8. Checks during service
  9. Paper or digital
  10. Frequently asked questions
  11. References

Key takeaways

  • Opening checks confirm the kitchen is safe to start: equipment at temperature, handwashing ready, pests absent, staff fit to work.
  • Closing checks protect tomorrow: food covered, labelled and chilled, surfaces cleaned, waste out, fridges reading correctly.
  • Every check needs a named role, a time and a written result, including what was done if something was wrong.
  • Ten minutes at each end of the day is the cheapest way to protect a hygiene rating that diners increasingly expect to be a 4 or 5.

Why the first and last ten minutes matter

Most food safety failures do not happen at the height of service. They start the night before, when a fridge door is left ajar or a tray of sauce is left out to cool and forgotten, or first thing in the morning, when nobody notices the walk-in is warm before the prep starts. Opening and closing checks catch those problems while they are still cheap to fix.

They also feed directly into how your kitchen is judged. Inspections score how food is handled, the physical condition of the premises, including cleanliness and pest control, and how you manage food safety[1]. Daily checks are evidence for all three. Food safety management packs such as Safer Food, Better Business are built around daily records kept in a diary[2].

Diners notice the results. Among people who know the hygiene rating scheme, the share who say 4 is the lowest rating they would generally accept rose from 39% in late 2020 to 52% in 2025[3].

People who say 4 is the lowest hygiene rating they would generally accept
People who say 4 is the lowest hygiene rating they would generally acceptComparison. Late 2020: 39%; 2025: 52%.39%Late 2020Late 2020: 39%52%20252025: 52%People who say 4 is the lowest hygiene rating they would generally acceptComparison. Late 2020: 39%; 2025: 52%.39%Late 2020Late 2020: 39%52%20252025: 52%

Source: Food Standards Agency, 2025[3]

Show the data
ItemValue
Late 202039%
202552%

The opening checklist

Whoever opens the kitchen works through these before any food is prepared. It takes about ten minutes once it is routine.

  1. Fridges, freezers and the walk-in: read and record each one. In England, chilled food must not be kept above 8°C[4], so investigate any reading near or above that before using the food.
  2. Look for signs of pests: droppings, gnawed packaging, insects in fly screens or electric fly killers, and anything left open overnight.
  3. Handwash basins: hot water running, soap and paper towels stocked, nothing stored in or in front of the basin.
  4. Probe thermometers: present, working and clean, with a probe wipe supply.
  5. Cleaning: surfaces, boards and equipment clean from the night before; sanitiser made up or available in date.
  6. Dishwasher and glasswasher: filled, at temperature and detergent and rinse aid connected.
  7. Deliveries: anything that arrived early has been checked and put away correctly.
  8. Staff fitness: everyone on shift has confirmed they have had no vomiting or diarrhoea, and anyone unwell has been sent home in line with your policy.
  9. Allergen information: the current version is at the pass and the front-of-house station, and any changes are noted for the briefing.
  10. Sign the opening section of the diary or checklist with the time.

The closing checklist

Closing checks are about leaving the kitchen safe for the next shift. They are most often skipped when service runs late and everyone wants to go home, so make them short and non-negotiable.

  1. Food left over: covered, labelled with the date and use-by, and in the fridge. Nothing left out to cool.
  2. Hot food: anything still in hot holding is used up, cooled quickly and chilled, or thrown away, following your procedure. In England, hot food must be held at or above 63°C[4], so food that has dropped below needs a decision now.
  3. Fridges and freezers: read and record each one again, doors closed and seals clean.
  4. Surfaces, boards, equipment and floors cleaned to the schedule for that day.
  5. Probes cleaned and put away; cloths into the wash, not left on the side.
  6. Bins emptied, lids closed and external bins secured.
  7. Doors and windows closed; fly screens in place; gaps under doors checked.
  8. Gas, ovens, fryers and extraction switched off and fryers covered.
  9. Anything that went wrong during the day recorded with what was done.
  10. Sign the closing section with the time.

What good looks like

Example standards for opening and closing checks
CheckGoodIf not
Walk-in readingWithin your target, for example 0 to 5°CMove food, check seals and settings, call engineer, record
Handwash basinHot water, soap, towels, clear accessStock or clear it before any food work starts
Pest signsNoneStop prep in the area, remove affected food, call contractor, record
Leftover foodCovered, labelled, chilledLabel now or discard if the time out of the fridge is unknown
Hot holding at closeEmpty or cooled and chilledDecide now: chill quickly or discard
Staff fitnessEveryone confirmed fitSend home anyone with vomiting or diarrhoea

The ‘if not’ column is the most important. A check that finds a problem is a success, as long as the action is taken and written down. A check that finds a problem and leaves it for someone else is the start of a bad inspection.

Who signs, and handovers

Assign each check to a role, not a person: ‘opening chef’, ‘closing kitchen porter’, ‘shift lead’. When rotas change, the job still has an owner. The shift lead checks that the list has been completed and initials it. Where the kitchen changes hands mid-day, for example between a breakfast and a lunch team, add a two-minute handover: fridge readings, anything in hot holding, anything in the cooling process, and any problems from the morning.

Example: in a fictional hotel kitchen in Harrogate, the breakfast chef leaves at 11am and the lunch chef arrives at 10.30. The handover sheet has four lines: fridges, hot holding, cooling and issues. Both chefs initial it. When a batch of stock was found half-cooled one morning, the sheet showed who had started it and when, so the lunch chef could decide quickly whether it could still be used.

Making checks stick

  • Put the checklist where the job is done: fridge readings on the fridge, closing list by the back door.
  • Keep the list to one page. Long lists get skipped.
  • Use actual readings and times, not ticks.
  • Review the sheets weekly and look for patterns: the same fridge running warm, the same check missed on Sundays.
  • Praise checks that catch problems in front of the team; it tells them the checks matter.
  • Include checks in induction so new starters learn them on day one.

If the closing list is regularly not finished, the problem is usually the closing time on the rota, not the list. Give the closing team the time they need.

Adapting the lists to your kitchen

The checklists above are a starting point. A pub kitchen serving Sunday roasts, a takeaway with a single fryer and a hotel kitchen running three services a day have different risks, so the lists should reflect what actually happens on your site. Walk through a normal day with the head chef and add or remove items.

  • Carveries and buffets: add a check of hot cabinets and sneeze guards at opening, and a record of when each joint or tray went out.
  • Takeaways: add checks of insulated delivery bags and packaging stock, and of the area where orders wait for drivers.
  • Bars serving food: add the bar fridges and the glasswasher, and check that garnishes are covered and dated.
  • Sites with cellars or outside stores: add a walk of the cellar for pests and damp, and a check that external stores are locked and clean.
  • Kitchens using sous vide or vacuum packing: add a check that the water bath is at temperature and that raw and ready-to-eat equipment is kept apart.
  • Sites that close for a day or more each week: add a fuller reopening check after the closed day, including running taps to flush water and checking fridges that have been closed for longer.

Example: a fictional village pub in Suffolk opens Wednesday to Sunday. Its Wednesday opening list has three extra lines: run every tap for two minutes, check the cellar and outside store for pests, and read every fridge twice an hour apart before stocking it. The extra checks take ten minutes once a week.

Checks during service

Opening and closing checks bracket the day, but a few checks belong in the middle of service too. Probe hot-held food at set intervals. Read the busiest fridges again mid-afternoon, when doors have been opened hundreds of times. Check the handwash basin is still stocked after the lunch rush. Keep these mid-service checks to a handful so they actually happen, and log them on the same sheet.

Paper or digital

Paper checklists are cheap and easy to start. Digital checklists on a tablet can time-stamp each entry, prompt for missing checks and send alerts when a reading is out of range. Either is fine if it is completed honestly at the time. If you go digital, keep a paper backup for days when the tablet is flat or the connection fails, and make sure you can show an officer past records quickly.

For the detail behind the temperature checks, see temperature control and probe checks. For the deeper cleaning that sits behind the daily routine, see cleaning schedules for commercial kitchens.

Frequently asked questions

Are opening and closing checks a legal requirement?

The law requires a food safety management system based on HACCP principles with monitoring and records. Daily opening and closing checks are the most practical way to show that monitoring happens.

How long should opening checks take?

Around ten minutes once the routine is established. If they take much longer, the list may be too long or the kitchen may need tidying the night before.

Who should sign the checks?

The person who carried out each check, with the shift lead initialling the completed list. Assign checks to roles so they are covered whoever is on the rota.

What if a fridge is warm at opening?

Do not use the food until you know how long it was warm. Move food to a working fridge, check the unit, call an engineer if needed and record what happened and what you decided.

References

  1. Food Standards Agency (2026). Food Hygiene Rating Scheme (opens in a new tab) ↑

  2. Food Standards Agency (2026). Safer food, better business (SFBB) (opens in a new tab) ↑

  3. Food Standards Agency (2025). Food Hygiene Rating Scheme (FHRS): Food and You 2 report, wave 11 (opens in a new tab) ↑

  4. legislation.gov.uk (The National Archives) (2013). The Food Safety and Hygiene (England) Regulations 2013, Schedule 4: temperature control requirements (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo