Food safety, hygiene and allergens

Legionella and water safety in hospitality

Legionella risk in pubs, hotels and restaurants: where it hides, the HSE temperature checks, weekly flushing, ice machines and reopening after a closure.

Ava research teamPublished 7 min read

On this page
  1. Why a pub or restaurant is in scope
  2. Where the risk sits in a hospitality building
  3. The temperatures HSE expects
  4. A routine you can actually keep
  5. Reopening after a closure or a change of hands
  6. Ice, drinks and the kitchen
  7. People, training and records
  8. Warning signs worth acting on
  9. Example: a village pub with four rooms
  10. Frequently asked questions
  11. References

Key takeaways

  • If you employ staff or control premises, you must assess and manage legionella risk; there is no small-venue exemption.
  • The HSE benchmarks are simple: store hot water at 60°C or higher, distribute it at 50°C or higher, and keep cold water below 20°C.
  • Little-used outlets are the classic problem in hospitality: flush showers and taps in empty rooms at least weekly.
  • Treat any reopening after a closure, refurbishment or change of operator as a water safety event, with checks before guests arrive.

Why a pub or restaurant is in scope

Legionnaires' disease is caught by breathing in tiny droplets of contaminated water, so the risk follows wherever water is stored warm, sits still or is sprayed. HSE is plain about responsibility: employers and those in control of premises must assess and manage the sources of risk[1]. A restaurant with a hot water cylinder, a pub with letting rooms or a hotel bar with a spa all fall inside that sentence. Size does not change the duty, only how much work it takes to meet it.

For a small venue the assessment can be short. It should name the person responsible, describe the water system, list where the risks are, and set out the checks that keep them under control. Many operators bring in a competent water hygiene contractor for the first assessment and then run the routine checks themselves.

Where the risk sits in a hospitality building

Common legionella risk points in pubs, restaurants and small hotels
Outlet or systemWhy it mattersTypical control
Showers in letting roomsSpray creates droplets; rooms can sit empty for daysWeekly flushing when unoccupied; regular cleaning and descaling of heads
Hot water cylinder or calorifierStored water can cool into the growth rangeKeep stored water hot and check the temperature monthly
Cold water storage tankCan warm up in a loft or plant room; debris collectsLid fitted, insulation, six-monthly temperature checks, inspection
Staff showers and back-of-house tapsOften forgotten and rarely usedAdd them to the weekly flushing list
Garden hoses and outdoor tapsWater sits in the hose in sun-warmed pipesDrain after use, flush before use, store out of the sun
Ice machines, coffee machines and post-mix linesConnected to mains water; scale and biofilm build upClean and descale to the manufacturer schedule; keep service records
Spa pools, hot tubs and water featuresWarm water plus spray is high riskSpecialist management and testing; seek expert advice

Dead legs, pipework that leads to an outlet that has been removed, deserve a special mention. They are common after refurbishments, when a sink is taken out and the pipe capped further back than it should be. Water in a dead leg never moves, so ask your plumber to cut redundant pipework back to the main run.

The temperatures HSE expects

HSE's guidance for hot and cold water systems sets three numbers that every duty manager should know. Hot water storage cylinders should store water at 60°C or higher, hot water should be distributed at 50°C or higher, and cold water should be stored and distributed below 20°C[2]. The aim is to keep water out of the warm band in which bacteria multiply.

HSE water temperature benchmarks for hot and cold systemsHot systems at or above the figure; cold systems below it
HSE water temperature benchmarks for hot and cold systemsBar chart. Hot water storage (minimum): 60 °C; Hot water distribution (minimum): 50 °C; Cold water storage and distribution (maximum): 20 °C.Hot water storage (minimum)Hot water storage (minimum): 60 °C60 °CHot water distribution (minimum)Hot water distribution (minimum): 50 °C50 °CCold water storage and distribution (maximum)Cold water storage and distribution (maximum): 20 °C20 °CHSE water temperature benchmarks for hot and cold systemsBar chart. Hot water storage (minimum): 60 °C; Hot water distribution (minimum): 50 °C; Cold water storage and distribution (maximum): 20 °C.Hot water storage (minimum)Hot water storage (minimum): 60 °C60 °CHot water distribution (minimum)Hot water distribution (minimum): 50 °C50 °CCold water storage and distribution(maximum)Cold water storage and distribution (maximum): 20 °C20 °C

Source: Health and Safety Executive, 2026[2]

Show the data
ItemValue
Hot water storage (minimum)60 °C
Hot water distribution (minimum)50 °C
Cold water storage and distribution (maximum)20 °C

Hot water at those temperatures can scald, so outlets used by guests, especially baths and basins in rooms, usually have thermostatic mixing valves that blend the water close to the tap. That protects guests while keeping the system itself hot. If you fit mixing valves, add them to the maintenance plan, because a failed valve can deliver water that is either too hot or too cool.

A routine you can actually keep

  1. Weekly: flush little-used outlets

    HSE says infrequently used outlets, including showerheads and taps, should be flushed at least weekly[2]. In a pub with rooms, that means any room that has not been occupied that week. Run the shower and hot and cold taps until the water reaches its normal temperature, and do it in a way that limits spray, for example with the head held low in the tray.

  2. Monthly: check sentinel outlets

    Sentinel outlets are the nearest and furthest taps on each part of the system. HSE expects you to identify them and check distribution temperatures monthly[2]. Record the temperature after running the water for the time your assessment sets.

  3. Monthly: check the hot water cylinder

    Read the cylinder flow and return temperatures and record them; HSE lists this as a monthly check[2].

  4. Every six months: check the cold water tank

    Record the cold tank temperature at least every six months[2], ideally once in summer when it is most likely to be warm, and look for debris, rust or a missing lid.

  5. Annually: review the assessment

    Review it every year and whenever something changes: new rooms, a refurbished kitchen, a new boiler or a long closure.

Put the weekly flush on the housekeeping checklist for each room, not on a separate sheet. Tasks tied to an existing routine get done; tasks on a clipboard in the office do not.

Reopening after a closure or a change of hands

Hospitality venues close and reopen often. About 26,000 accommodation and food services businesses closed in 2024[3], and most pubs that change hands carry on as hospitality venues: about 90% of those sold by one major agent in early 2026 did[4]. That means many operators take over buildings whose water systems have stood still for weeks or months. Seasonal venues that shut for the winter face the same issue every spring.

  1. Before reopening, ask a competent person to inspect the system and advise whether flushing alone is enough or whether cleaning and disinfection are needed.
  2. Bring the hot water system up to temperature and check the cylinder before guests arrive.
  3. Flush every outlet, starting with the one closest to the incoming supply and working outwards.
  4. Clean and descale showerheads and replace any that are badly scaled.
  5. Empty, clean and sanitise ice machines and replace filters before making ice for drinks.
  6. Record what was done, by whom and when, and file it with the risk assessment.

Ice, drinks and the kitchen

Food hygiene law adds its own water requirement: there must be an adequate supply of potable water, and non-potable water must not connect with or flow back into potable systems[5]. Ice used in drinks is food, so an ice machine is both a water safety and a food safety issue. Clean it to the manufacturer's schedule, keep the scoop outside the bin, and include the machine in your cleaning records.

Post-mix soft drink systems, coffee machines and glasswashers also connect to the mains. They are less likely to create a legionella risk than a shower, but scale and biofilm affect taste and hygiene, so the service history should be easy to find.

People, training and records

Training is where small venues often fall short. Only 42% of accommodation and food SME employers provided training in 2025, among the lowest of any sector[6]. Legionella control does not need a long course for most staff, but the people doing the weekly flushing and monthly checks should know why they are doing it and what to do when a reading is out of range.

  • Name a responsible person and a deputy in the risk assessment.
  • Keep a simple log: date, outlet, temperature, initials and any action taken.
  • Agree what counts as a failed reading and who to call: for example, the hot water cylinder below 60°C[2] goes straight to the manager and the heating engineer.
  • Keep contractor reports, cleaning records and the risk assessment in one place.

Warning signs worth acting on

Most legionella problems announce themselves long before anyone is ill. Train the team to report these signs to the duty manager on the day they notice them, and treat each one as a reason to check temperatures and call the person named in your assessment.

  • Hot taps that take a long time to run hot, or never get properly hot, especially at the far end of the building.
  • Cold taps that run lukewarm in summer, which often points to a warm tank or pipes running beside heating.
  • Heavy scale on showerheads or tap outlets, or brown water when a little-used tap is first opened.
  • A cylinder thermostat that someone has turned down to save energy. Lower settings cut bills but can let stored water cool into the range where bacteria multiply.
  • New outlets added during a refurbishment without anyone updating the risk assessment or the flushing list.

Example: a village pub with four rooms

Example: a pub reopens its four letting rooms on 1 April after closing them for the winter. In March, the licensee's water hygiene contractor inspects the system, cleans the cold tank and confirms that flushing plus a cylinder temperature check will do. On reopening day, the cylinder reads 62°C and sentinel taps reach temperature quickly. Housekeeping adds a line to each room checklist: if the room has not been let that week, run the shower and taps on Monday morning. In May, a monthly check finds the furthest basin slow to get hot; a plumber discovers a capped pipe from an old sink and cuts it back. Each step is logged, so when the council visits for the food hygiene inspection and asks about the rooms, the licensee can show the whole record in two minutes.

Frequently asked questions

Does a small restaurant need a legionella risk assessment?

Yes. Employers and those in control of premises must assess and manage legionella risk. For a simple system the assessment can be short, but it should exist and be kept up to date.

How often should we flush showers in empty rooms?

HSE says infrequently used outlets, including showerheads, should be flushed at least weekly.

Do we need a contractor?

Not always for routine checks, but many venues use a competent water hygiene contractor for the initial assessment, after long closures and for any complex systems such as spa pools.

Is ice covered by food hygiene rules?

Yes. Ice in drinks is food, and food hygiene law requires an adequate supply of potable water, so ice machines need cleaning and records like other food equipment.

References

  1. Health and Safety Executive (2026). Legionella and Legionnaires' disease (opens in a new tab) ↑

  2. Health and Safety Executive (2026). Managing legionella in hot and cold water systems (opens in a new tab) ↑

  3. Office for National Statistics (2024). Business demography, UK: 2024 (opens in a new tab) ↑

  4. Christie & Co (2026). Pubs & Restaurants Market Review 2026 (opens in a new tab) ↑

  5. legislation.gov.uk (The National Archives) (2004). Regulation (EC) No 852/2004 on the hygiene of foodstuffs, Annex II (opens in a new tab) ↑

  6. Department for Business and Trade (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo